Specifications
[1] Control Stability is based on the range of pressure control module Pressure Specifications Pressure Range 15-10,000 psi (1-700 Bar) Range Selection Manual 3K psi, Manual 10K psi or Auto-range Accuracy 0-10,000 psi, 0.01%FS 0-10,000 psi, 0.02%FS 0-3,000 psi, 0.01%FS 0-3,000 psi, 0.02%FS Resolution 7 digits 6 digits Maximum External Load Capacity Max: 80 ml @ 700 Bar, 50 ml reccomended Reservoir Max: 350 ml, push-on reservoir cap, built-in filter Control Stability [1] ≤ 0.005% FS from 100 to 10,000 psi Stability Duration > 5 min Pressure Modules Built-in one module with dual range External Control Pressure Module See the following “External Control Pressure Module Specification and Compatibility” table External Measurement Pressure Module All ADT161 pressure modules Electrical Specifications Specification Range Resolution Accuracy Note Current Measure Auto-ranging ±25 or ±50 mA 0.1 μA 0.008 %RD + 1.0 μA Impedance < 10 Ω 0.008 %RD + 2.0 μA Voltage Measure ±300 mV 1 μV 0.008 %RD + 6 μV Impedance > 1 GΩ Auto-ranging ±5, ±12 or ±30 V ±5 V: 20 μV 0.008 %RD + 100 μV Impedance > 1 MΩ ±12 V: 0.1 mV 0.008 %RD + 240 μV ±30 V: 0.1 mV 0.008 %RD + 600 μV Loop Power Source 24 V N/A ±1 V 50 mA (Max Loading) mA Source 0 to 2.5 mA or 2.5 to 25 mA 0-2.5 mA: 0.05μA, 0-25 mA: 0.5μA 0-2.5 mA: 0.008 %RD + 0.2 μA, 0-25 mA: 0.008 %RD + 1.0 μA 20 mA @ 1 kΩ Power Source 16 to 30 V 1 V ±1 V 70 mA (Max Loading) V Source 0 to 16 V 250 μV 0.008 %RD + 500 μV Pressure Switch Mechanical Switch, Live Mechanical Switch, NPN Switch, PNP Switch N/A N/A Response time < 10 ms if the switch is powered. Voltage range: (3-30) V Temperature Compensation 18°C to 28°C Temperature Coefficient Outside of 18°C to 28°C: <±0.0005%RD+0.00005%FS/°C Misuse Protection Up to 30 V on any two sockets Pressure Switch Test Supported HART / Profibus PA Supported General Specifications Specification Description User Interface Color touch screen and keypad operation Display 7” TFT touch screen 800 x 480 color Enclosure IP Rating IP31 Power Dedicated lithium battery or power adapter Battery Rechargeable Li-Ion battery, typically 12 hours of operation, less than 5 hours recharge. Weight 28 lbs (12.8 kg) without media Size 11.81 x 8.66 x 7.56 in (300 x 220 x 192 mm) Communications Wi-Fi, LAN, Bluetooth, USB, Ethernet HART Communication Read, configure and calibrate HART devices – DD files updated periodically Data Storage > 8 GB Data Logging Up to 1,000,000 readings (data and time stamped) Task documentation Up to 1,000 tasks can be stored with data Automation Functions Switch test, auto step, leak test User Interface Localization English, German, French, Italian, Spanish, Portuguese, Chinese, Japanese, and Russian Pump life > 1,000,000 cycles Environmental Specifications Operating temperature: 32°F to 122°F( 0°C to 50°C) Storage temperature: -20°C to 60°C ( -4°F to 120°F) Humidity: <90%, non-condensing Certification ISO 17025 accredited certificate of calibration with NIST-traceable data Compliance CE Software Compatibility ACal, Additel Land and Additel Link for access via mobile application
